Schurr Sails in Pensacola Florida

More
2 months 2 weeks ago #3217 by Dale Kramer
Schurr Sails in Pensacola Florida was created by Dale Kramer
I have to get a new Main and Mizzen and have priced out several sailmakers. Schurr Sails has the best pricing.

Has anyone had this ailmaker make sails for them and what is you opinion of the work? Quality, etc.

Thanks for input in advance.

Dale Kramer
S/V Puffin, #169.

Please Log in or Create an account to join the conversation.

More
2 months 2 weeks ago #3218 by John Bozeman
Replied by John Bozeman on topic Schurr Sails in Pensacola Florida
Schurr sails made Orcas sails two years ago ,they are great, Hunter Riddle and his team makes sure every measurement is precise. I highly recommend them. My boat is in Pensacola within a mile from their shop. He has all my measurements .

Please Log in or Create an account to join the conversation.

More
2 months 2 weeks ago #3221 by Dale Kramer
Replied by Dale Kramer on topic Schurr Sails in Pensacola Florida
Great. Thanks for your input.

Please Log in or Create an account to join the conversation.

More
2 months 2 weeks ago #3224 by Dale Kramer
Replied by Dale Kramer on topic Schurr Sails in Pensacola Florida
I am unable to tell from the picture. Is Orca a bowsprit version?

Please Log in or Create an account to join the conversation.

More
2 months 1 week ago #3227 by Jim phillips
Replied by Jim phillips on topic Schurr Sails in Pensacola Florida
Dale,

We have a new main and a new mizzen (new to us) that the previous owner had made as our boat is in shell beach.

We took them out and they are fantastic quality, Feel free to ask what our dimensions are and the cut as the previous owner spent months getting them right.

Our boat is a 1974 Whitby 42 without the cutter (bowspirit)

People came by admiring our sail and asked who made them and cut them including a captain the did the run from Houston TX to New Zealand non-stop on a delivery.
Good luck!
Jim

Please Log in or Create an account to join the conversation.

Time to create page: 0.105 seconds
Powered by Kunena Forum