maxwell windlass

More
10 years 3 weeks ago #493 by paul campbell
maxwell windlass was created by paul campbell
I'm trying to find an eletric motor for my original nillson maxwell "1985" windlass any sorcess avvailable.
Thanks Paul

Please Log in or Create an account to join the conversation.

More
10 years 3 weeks ago #494 by Douglas Stephenson
Replied by Douglas Stephenson on topic Re:maxwell windlass
In my experience I have no luck in finding a source for a replacement. Perhaps someone in the group has had the experience and can share it with us.
I googled for maxwell nillson V 3000 and the same again but V3000 and there is a lot of chatter out there about parts and even a complete one for sale. Sorry, I know this is not the answer you were hoping for. Anyone??? Thanks, Douglas

Please Log in or Create an account to join the conversation.

More
10 years 3 weeks ago #495 by Lisa Cornelius
Replied by Lisa Cornelius on topic Re:maxwell windlass
Hi,

The original manufacture is in New Zealand. The local USA guys are in CA. (they are not helpful)

They sand cast a new Gypsy and Cones for me. Really amazing!

Debbie Nilsson - Sales

James Nilsson Ltd - Winchmakers

Fax: **649 444 5 222 Tel: **649 444 5 219 See our website:
www.jamesnilsson.com

To call them:

This tells the time and dialing codes. You are 15 hours ahead of them.

www.timeanddate.com/worldclock/dialingco...p1=1029&p2=22&number
=444+5+219

Patrick Cornelius S/V Gaia Whitby 42 in Sassafras River Cheasapeake Bay

Please Log in or Create an account to join the conversation.

More
10 years 3 weeks ago #497 by Lisa Cornelius
Replied by Lisa Cornelius on topic Re:maxwell windlass
CaptDuff,

MORE INFO: two more emails that I found. Nick Chaney and Crazy John crazyjohn@svsundancer.com


To all: S/V Sundancer, hull 272 1987 Brewer 12.8 has a Maxwell Nillson VWC-1000 with Patrick's problems. Maxwell does not want us to know that Nillson is alive and well, I think in Australia or New Zeland. Look them up on the internet for parts and support. They "Debbie" have been very helpful. My VWC-1000 had a single direction motor which a starter-generator shop rewired for bi-directional service. It works great.

(((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((

AI had the VW3000 on Caribbean Soul and had the same issues with Maxwell. No parts no serice get a new one!!!! The Nillson's are great and can get you most any part you need. Here is some contact information:
Grant Nilsson
James Nilsson - Winchmakers
69 Hillside Road
Glenfield
Auckland, New Zealand
Fax: **649 444 5 222 Tel: **649 444 5 219
Web: www.jamesnilsson.com

I may regret not putting more money into my 3000. It is a very serious windlass!

Good Luck

Nick Chaney
S/V Caribbean Soul Brewer 42 #243
www.caribbeansoul.us


Correction from last email:
I am still asleep it is 5 thirty in the morning. New Zealand is 15 hours AHEAD of Eastern Daylight Time. If you call.
Attachments:

Please Log in or Create an account to join the conversation.

More
10 years 3 weeks ago #498 by Lisa Cornelius
Replied by Lisa Cornelius on topic Re:maxwell windlass
MORE PHOTOS

Please Log in or Create an account to join the conversation.

More
10 years 3 weeks ago #499 by Lisa Cornelius
Replied by Lisa Cornelius on topic Re:maxwell windlass
photos not showing
email me for more photos and info

patrickecornelius@comcast.net

or call me Regards,

Patrick Cornelius
19 Charles Point
Newark, DE 19702
302-286-7134

cell on boat most days 302-981-0237

Please Log in or Create an account to join the conversation.

More
10 years 3 weeks ago #501 by Douglas Stephenson
Replied by Douglas Stephenson on topic Re:maxwell windlass
Thank you Patrick and everyone else who responded to the nillson maxwell V3000 inquiry. This shows the importance and level of courtesy among our network. Terrific!!! Best regards to everyone, Douglas

Please Log in or Create an account to join the conversation.

Time to create page: 0.112 seconds
Powered by Kunena Forum