placement of holding tanks

More
11 years 2 months ago #81 by tom jones
placement of holding tanks was created by tom jones
capns we are new owners of 84 brewer 42 centerboard. been doing lots of refit work. where are your holding tanks located for both front and aft heads. many thanks tom jones bluejacket annapolis. tj5035@gmail.com

Please Log in or Create an account to join the conversation.

More
11 years 1 month ago #92 by Douglas Stephenson
Replied by Douglas Stephenson on topic Re:placement of holding tanks
I must admit I am not familiar with the center board version of the Brewer. The standard location of a holding tank of about 38 gallons was under the forward companionway bulkhead and access to the inspection plate was through the bottom of the wetgear hanging locker. I have seen specs for some vessels having two tanks but I am only familiar with the one tank application servicing both heads. Each head also had a direct overboard discharge option. Did you find each of those thru-hulls? Sorry for the delay in response.

Please Log in or Create an account to join the conversation.

Time to create page: 0.083 seconds
Powered by Kunena Forum