Interior drawers on Brewer 12.8

More
6 years 5 months ago #1791 by George Myers
Interior drawers on Brewer 12.8 was created by George Myers
Most of the drawers on my boat are wobbly, hard to pull out -push in , crooked, tilt up and down, and need serious work. Seems they were not built with slides , guides (or anything else) . Anybody here fix this problema???

Please Log in or Create an account to join the conversation.

More
6 years 5 months ago #1792 by George Myers
Replied by George Myers on topic Interior drawers on Brewer 12.8
Just a box without a top with a faceplate stuck in a hole.

Please Log in or Create an account to join the conversation.

More
6 years 5 months ago #1793 by Martin Gaffney
Replied by Martin Gaffney on topic Interior drawers on Brewer 12.8
Yup you described the drawers! On my Brewer 12.8 #10 there are two types of drawer. The first type has a plastic slide screwed to the underside, inside end of drawer with 2 or 3 screws. This slide fits onto a made up wooden T section slider support and with the addition of some silicone spray works again just fine. Type 2 has wire supported jockey wheel that runs in steel support channel. The channels are themselves supported by two screws at the outer end and fit a screw attached plastic bracket inside end. They are fractionally offset and I found them a bitch to line up to get smooth operation. If your boat is like mine then, the exact plastic parts are still very available. I ''googled'' them and hit right away.

Please Log in or Create an account to join the conversation.

More
6 years 5 months ago #1794 by Martin Gaffney
Replied by Martin Gaffney on topic Interior drawers on Brewer 12.8
Swissco.com # 32 031 rear drawer slides
# 32 080 rear drawer track socket

Cost pennies. I bought 25 of the first and 15 of the second so have spares if this is what you need. But they are on my boat and you may prefer to go ahead and buy.

Please Log in or Create an account to join the conversation.

More
6 years 5 months ago #1796 by C. William Eilers, Jr
Replied by C. William Eilers, Jr on topic Interior drawers on Brewer 12.8
The drawer slides used on my Brewer 12.8 number 11 are manufactured by Delta industries in Carson city Nevada. They are called delta drawer slides and are available many places. I bought mine from Rockler woodworking and hardware

Please Log in or Create an account to join the conversation.

More
6 years 5 months ago #1800 by George Myers
Replied by George Myers on topic Interior drawers on Brewer 12.8
Dear Martin, I want to buy your surplus drawer hardware. Offer$40 w/ship. Can pay via PayPal. my email is georgetheleo@hotmail.com

Please Log in or Create an account to join the conversation.

More
6 years 5 months ago #1801 by Martin Gaffney
Replied by Martin Gaffney on topic Interior drawers on Brewer 12.8
Not a problem. I am going down to the boat on Monday 21st and back the 28th. Will bring back my spares. will contact you by email to confirm.

Please Log in or Create an account to join the conversation.

More
6 years 4 months ago #1807 by George Myers
Replied by George Myers on topic Interior drawers on Brewer 12.8
Dear Martin, DId you remember to send them?

Please Log in or Create an account to join the conversation.

More
6 years 3 months ago #1827 by Martin Gaffney
Replied by Martin Gaffney on topic Interior drawers on Brewer 12.8
Hi Leo, how did they work out for you. Other members may be interested in the source if the parts fitted both of our boats.

Please Log in or Create an account to join the conversation.

More
6 years 3 months ago #1829 by George Myers
Replied by George Myers on topic Interior drawers on Brewer 12.8
Havent tried them yet-will post when I do.

Please Log in or Create an account to join the conversation.

Time to create page: 0.121 seconds
Powered by Kunena Forum